CCIE R&S V5.1 Written Exam: Implement and Troubleshoot Device Management
I will be discussing Implement and Troubleshoot Device Management as part of Layer 3 Technologies and Fundamental Routing Concepts CCIE Routing and Switching (R&S) V5.1 exam blueprint topics.
Implement and Troubleshoot Device Management :
6.1 System management
6.1.a Implement and troubleshoot device management
6.1.a [i] Console and VTY
6.1.a [ii] telnet, HTTP, HTTPS, SSH, SCP
6.1.a [iii] [T]FTP
Let me summarize some of the key takeaways related to CCIE R&S V5.1 Written Exam: Implement and Troubleshoot Static Routing as relevant to CCIE Routing and Switching (R&S) V5.1 written exam blueprint topics.
- The console port on the router is an EIA/TIA-232 asynchronous, serial connection with no flow control and an RJ-45 connector
- The last four bits of the register are called the boot field. If the last digit of the config register is 2, the router examines NVRAM for boot system commands
- The activation character is the character that starts a terminal session when it is typed
- All logged messages by default are sent to console port
I sincerely hope that you found this article and video helpful. Please post your questions or suggestions in the comments and tell me how you are preparing for your CCIE Routing and Switching (R&S) V5.1 written and lab exams.