CCIE R&S V5.1 Written Exam: Implement and Troubleshoot EIGRP Stub
I will be discussing Implement and Troubleshoot EIGRP Stub as part of Layer 3 Technologies and Fundamental Routing Concepts CCIE Routing and Switching (R&S) V5.1 exam blueprint topics.
Redistribution between any Routing Protocol :
3.5 EIGRP [for IPv4 and IPv6]
3.5.e Implement and troubleshoot EIGRP stub
3.5.e [i] Stub
3.5.e [ii] Leak-map
Let me summarize some of the key takeaways related to CCIE R&S V5.1 Written Exam: Implement and Troubleshoot Static Routing as relevant to CCIE Routing and Switching (R&S) V5.1 written exam blueprint topics.
- Any neighbor that receives a packet informing it of the stub status will not query the stub router for any routes, and a router (such as a hub) that has a stub peer will not query that peer
- Configuring the leak-map keyword allows to advertise a component route that would otherwise be suppressed by the manual summary. Any component subset of the summary can be leaked. A route map and access list must be defined to source the leaked route.
- eigrp stub command is issued with the leak-map name keyword-argument pair to configure the device to reference a leak map that identifies routes that would have been suppressed
I sincerely hope that you found this article and video helpful. Please post your questions or suggestions in the comments and tell me how you are preparing for your CCIE Routing and Switching (R&S) V5.1 written and lab exams.
How useful was this post?