CCIE R&S V5.1 Written Exam: Implement and Troubleshoot Operations
I will be discussing Implement and Troubleshoot Operations as part of Layer 3 Technologies and Fundamental Routing Concepts CCIE Routing and Switching (R&S) V5.1 exam blueprint topics.
Implement and Troubleshoot Operations:
3.5 EIGRP [for IPv4 and IPv6]
3.5.d Implement and troubleshoot operations
3.5.d [i] General operations
3.5.d [ii] Topology table, update, query, active, passive
3.5.d [iii] Stuck in active
3.5.d [iv] Graceful shutdown
Let me summarize some of the key takeaways related to CCIE R&S V5.1 Written Exam: Implement and Troubleshoot Static Routing as relevant to CCIE Routing and Switching (R&S) V5.1 written exam blueprint topics.
- The show ip eigrp topology command displays the EIGRP router ID. The EIGRP router ID comes from the highest IP address assigned to a loopback interface
- Any neighbor that receives a packet informing it of the stub status will not query the stub router for any routes, and a router (such as a hub) that has a stub peer will not query that peer
- SIA-Query and SIA-Reply help localize a network failure
I sincerely hope that you found this article and video helpful. Please post your questions or suggestions in the comments and tell me how you are preparing for your CCIE Routing and Switching (R&S) V5.1 written and lab exams.
How useful was this post?