CCIE R&S V5.1 Written Exam: Implement and Troubleshoot Switch Security Features
I will be discussing Implement and Troubleshoot Switch Security Features as part of Layer 3 Technologies and Fundamental Routing Concepts CCIE Routing and Switching (R&S) V5.1 exam blueprint topics.
Implement and Troubleshoot Switch Security Features :
5.2 Network security
5.2.a Implement and troubleshoot switch security features
5.2.a [i] VACL, PACL
5.2.a [ii] Stormcontrol
5.2.a [iii] DHCP snooping
5.2.a [iv] IP source-guard
5.2.a [v] Dynamic ARP inspection
5.2.a [vi] port-security
Let me summarize some of the key takeaways related to CCIE R&S V5.1 Written Exam: Implement and Troubleshoot Static Routing as relevant to CCIE Routing and Switching (R&S) V5.1 written exam blueprint topics.
- A traffic storm occurs when packets flood the LAN, creating excessive traffic and degrading network performance. The traffic storm control feature prevents LAN ports from being disrupted by a broadcast, multicast, or unicast traffic storm on physical interfaces
- A private VLAN partitions the Layer 2 broadcast domain of a VLAN into sub-domains, allowing you to isolate the ports on the switch from each other. A sub-domain consists of a primary VLAN and one or more secondary VLANs
- IPv6 source guard is an interface feature between the populated binding table and data traffic filtering. This feature enables the device to deny traffic when it is originated from an address that is not stored in the binding table
I sincerely hope that you found this article and video helpful. Please post your questions or suggestions in the comments and tell me how you are preparing for your CCIE Routing and Switching (R&S) V5.1 written and lab exams.