Lesson 1: Explain the role and function of network components

Lesson 2: Describe characteristics of network topology architectures

Lesson 3: Compare physical interface and cabling types

Lesson 4: Identify interface and cable issues (collisions, errors, mismatch duplex, and/or speed)

Lesson 5: Compare TCP to UDP

Lesson 6: Configure and verify access control lists

Lesson 6: Configure and verify IPv4 addressing and subnetting

Lesson 8: Configure and verify IPv6 addressing and prefix

Lesson 9: Compare IPv6 address types

Lesson 10: Verify IP parameters for Client OS (Windows, Mac OS, Linux)

Lesson 1: Configure and verify VLANs (normal range) spanning multiple switches

Lesson 2: Configure and verify interswitch connectivity

Lesson 3: Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP)

Lesson 5: Describe the need for and basic operations of Rapid PVST Spanning Tree Protocol and identify basic operations

Lesson 6: Compare Cisco Wireless Architectures and AP modes

Lesson 7: Describe physical infrastructure connections of WLAN components (AP,WLC, access/trunk ports, and LAG)

Lesson 8: Describe AP and WLC management access connections (Telnet, SSH, HTTP,HTTPS, console, and TACACS /RADIUS)

Lesson 9: Configure the components of a wireless LAN access for client connectivity using GUI only such as WLAN creation, security settings, QoS profiles, and advanced WLAN settings

Lesson 1: Interpret the components of routing table

Lesson 2: Determine how a router makes a forwarding decision by default

Lesson 3: Configure and verify IPv4 and IPv6 static routing

Lesson 4: Configure and verify single area OSPFv2

Lesson 5: Describe the purpose of first hop redundancy protocol

Lesson 1: Configure and verify inside source NAT using static and pools

Lesson 2: Configure and verify NTP operating in a client and server mode

Lesson 3: Explain the role of DHCP and DNS within the network

Lesson 4: Explain the function of SNMP in network operations

Lesson 5: Describe the use of syslog features including facilities and levels

Lesson 6: Configure and verify DHCP client and relay

Lesson 7: Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing, shaping

Lesson 8: Configure network devices for remote access using SSH

Lesson 9: Describe the capabilities and function of TFTP/FTP in the network

Lesson 1: Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques)

Lesson 2: Describe security program elements (user awareness, training, and physical access control)

Lesson 3: Configure device access control using local passwords

Lesson 4: Describe security password policies elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, and biometrics)

Lesson 5: Describe remote access and site-to-site VPNs

Lesson 6: Describe, implement, and troubleshoot site-to-site VPNs such as GETVPN, DMVPN and IPsec

Lesson 7: Configure Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security)

Lesson 8: Differentiate authentication, authorization, and accounting concepts

Lesson 9: Describe wireless security protocols (WPA, WPA2, and WPA3

Lesson 10: Configure WLAN using WPA2 PSK using the GUI

Lesson 1: Explain how automation impacts network management

Lesson 2: Compare traditional networks with controller-based networking

Lesson 3: Describe controller-based and software defined architectures (overlay, underlay, and fabric)

Lesson 4: Compare traditional campus device management with Cisco DNA Center enabled device management

Lesson 5: Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)

Lesson 6: Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible

Lesson 7: Interpret JSON encoded data

CCNA Practice Exam: Network Fundamentals

CCNA Practice Exam: Network Access

CCNA Practice Exam: IP Connectivity

CCNA Practice Exam: IP Services

CCNA Practice Exam: Security Fundamentals

CCNA Practice Exam: Automation and Programmability

CCNA Practice Exam: Final Exam

CCNA Exam Cert Study Guide PDF eBook Download (165 pages)

BONUS: Cisco CCNA 200-301 105-Hour Learning and Study Plan